Manufacturers of woodworking cutting tools know that, the base material welded with cemented carbide is generally carbon steel, and the (thermal) expansion coefficient of cemented carbide wire is generally about 1/2 of that of steel, and the thermal conductivity of cemented carbide is low, so the following problems are likely to occur during welding: Welding cracks Since the …

What’s the Welding Quality Problems With Carbide and Steel? Read More »

How does the helix angle of the end mill affect the processing performance? First, let’s look at the role played by the helix angle of the end mill. What’s the affection of the helix angle? The larger the helix angle of the end mill, the longer the contact line between the workpiece and the cutting …

How Does the Helix Angle of End Mill Affect the Processing Performance? Read More »

From the daily processing point of view, the carbide tip of the single-blade saw blade itself is the most prone to damage. More serious, there will be direct breakage of saw blade serrations. Taking the heat treatment processing of the saw blade base steel as an example, an unqualified heat treatment process will cause the …

Carbide tip broken when using woodworking cutting saw blades Read More »

There are 8 tips you should know before installing the carbide tipped segmented spiral cutter head. 1. When the spiral cutter shaft has been installed on the machine and the blade is to be replaced, the power supply of the equipment must be turned off first. 2. Use an air gun or a brush to …

Eight Tips for Installing the Spiral Cutter Head – UKO Blog Read More »

Woodworking multi-blade saw blades with scraper blades, high cutting precision, neat cutting joints, smooth cutting surface, small cutting noise, no deformation of the matrix, long cutting life. Saw blade ultra-thin saw the road, high use of wood, sawdust amount is small, can play the role of improving environmental protection, has the advantage of high-cost performance. The material used …

What effect does a multi-blade saw blade with scraper blades have? – UKO Blog Read More »

Many people will choose to buy Chinese tungsten carbide products on the Internet. How to find high-quality original factories is a difficult problem. Zhuzhou, Hunan Province, is well-known in China’s alloy industry, where many large factories are located. Recently, the Zhuzhou advanced hard materials industry chain promotion and industry chain enterprise joint party committee establishment …

How To Find the Original Factory To Buy Tungsten Carbide Products? UKO Blog Read More »

Gripper Dies are those dies that are used in making nails in fasteners industries. Coiled wire after being fed into the nail-making machine is gripped by a pair of gripper dies. The desired shape of the nails is already machined into the end of the gripper dies. These dies hold the wire tightly in place, …

Let’s talk about the usage of gripper dies UKO Blog Read More »

Do you know the most commonly used milling cutters in machining? Tungsten steel milling cutter is a kind of tool made of tungsten steel (tungsten carbide)，which is made through various processing procedures through carbide rods provided by Zhuzhou UKO Precision Carbide Co., Ltd. For this multi-tooth rotary tool, each tool is equivalent to a turning …

The most common types milling cutters in machining – UKO Blog Read More »

Hot rolled steel bars for construction are divided into round and straight bars. The steel bars with diameter less than 12mm are generally made into circles for easy transportation. In order to achieve the purpose of straightening, the round steel bar should be laid out and cold drawn before blanking. Steel bars with a diameter …

What are the straightening skills of straightening dies? Read More »

A set of edge banding machine knives include a lot, like Diamond pre-milling cutter, flush saw blade, fine trimming knife, roughing milling cutter, edge cutter etc. edge banding machine knives How to adjust the side pressure wheel in and out? Pressure regulation? What happens if the pressure wheel is too large or too small, and …

how to adjust a set of edge banding machine knives? Read More »